Position : Home > Product > Leaf Spring Machines > Multi Function Press
-
-
Multi Function Press
Multi-function press is specially design for hole punching/dimpling, end/corner cutting, end bending, small Z forming, which could be 2 stations, 3 stations or 4 stations as required.
Details
Main technical parameter:
|
4 stations(1, 2 or 3 are optional)
|
|
|
1#, 2#, 3# and 4# stations are arranged from right to left. Rated working capacity is 200T/ 160T/160T/160T. 1# and 2# stations use one oil pump and 3# and 4# stations use other one oil pump. Power of the oil pump: 30KW * 2 set=60KW.
|
|
|
Size of the upper working table
|
520mm (left to right); 460mm (front to back)
|
|
Size of the low working table
|
620mm (left to right); 650mm (front to back)
|
|
Center hole
|
∮70mm
|
|
Size of center hole on the low working table
|
∮180mm
|
|
Stroke of the oil cylinder is about 300mm. The oil cylinder can inching work or linkage work.
|
|
|
Height of open die:
|
800mm
|
|
Height of close die
|
500mm
|
|
Idle load speed is more than 100mm/s
|
|
|
Load speed
|
15mm/s
|
|
Height of the working table
|
600mm
|
|
SIMENS PLC Control
|
|
|
Two sets of separate hydraulic system, so two stations could work at same time.
|
|
Previous:No Information
Next:No Information
Next:No Information
Leaf Spring Machines
Contact
Shandong General Technology Co.,Ltd.(SDGT)
Add：53 Luoyuan street
Jinan, 250011, Shandong,
China
Tel： (86) 531-86020106 / 86022286
Fax： (86) 531- 86028606
Zip Code：250011
Email：sdgt@sdgt.com.cn
Web：www.sdgt.com.cn
