欢迎

Position : Home > Product > Leaf Spring Machines > Multi Function Press

Image1 Image2 Image3 Image4 Image5 Image6
  • Multi Function Press

Multi-function press is specially design for hole punching/dimpling, end/corner cutting, end bending, small Z forming, which could be 2 stations, 3 stations or 4 stations as required.

Details

Main technical parameter:

4 stations(1, 2 or 3 are optional)
1#, 2#, 3# and 4# stations are arranged from right to left. Rated working capacity is 200T/ 160T/160T/160T. 1# and 2# stations use one oil pump and 3# and 4# stations use other one oil pump. Power of the oil pump: 30KW * 2 set=60KW.
Size of the upper working table
520mm (left to right); 460mm (front to back)
Size of the low working table
620mm (left to right); 650mm (front to back)
Center hole
∮70mm
Size of center hole on the low working table
∮180mm
Stroke of the oil cylinder is about 300mm. The oil cylinder can inching work or linkage work.
Height of open die:
800mm
Height of close die
500mm
Idle load speed is more than 100mm/s
Load speed
15mm/s
Height of the working table
600mm
SIMENS PLC Control
Two sets of separate hydraulic system, so two stations could work at same time.

 

Hits:  UpdateTime:2015-11-03 09:28:14  【Printing】  【Close
Previous:No Information
Next:No Information